Each command consists of at least 2 parameters. Make sure to read this manual carefully before using this product. Hangup Fail rized unit and re-set up the authorized numbers. As a result it does not send aything back to me. My first tk-102 would only work if I was within 100 feet of the cell tower, All commands worked if at tower location. It just keeps flashing as if it had gps lock.
It will alarm one time in each setting. I cannot turn it off and on as its inside the car, i alsto tried restart123456 and begin123456 but without results. This may interfere the transmission, and increase the radiation as well. It seems to have frozen up. Time interval and repeat time must be in 3 digits length. For first use, please initialize the unit and restore it to default setting. It will alarm one time in each setting.
By default most sim cards have international roaming disabled due to the steep international call rates that some telcos have. If you have a web-connected smartphone you can click on the coordinates and a map will open so you can see the location. However, it can give you the real-time location of your child, teen or runaway pet, and that may be all the information you need to make sure your loved ones are safe. When its switched on and connected to a network, the phone is answered. I think that this is a seriuos bug. The unit turns on automatically when the sim card and battery is inserted.
The indicator will keep flashing every 4 seconds when th e unit has received the signals, otherwise it will keep on. Yet when I put the sim and the battery in, the now blue light flashes, but it never gets a single message or responds to the begin command. Humidity 4 ----------------------- Page 5----------------------5 Usage 5. Yesterday, I was able to call it and it sent me google map link that I was able to use very easily. Don t put the unit in overheated or overcooled places.
Does it ring and respond? This may interfere the transmission, and increase the radiation as well. Of you cant obtain it from him, your device will have to be hard reset by the manufacturer. I tried every command now, but it does not react at all. No commands work and the light flashes the same as if I had a sims card in it or out of it. Don t paint the unit, this may cause some foreign materials left in between the parts. Please initialize the unit and re-set up the authorized numbers. Found I could rarely connect with the tracker because of poor mobile signal, so gave up using it.
Oh well its off for a refund. A reliable gps signal needs to have clear sight to the satellites, no obstructions. An old Nokia, old iPhone, most people have an old phone laying around somewhere. Hello, Just got the 102b, and I like it so far, but I do have a problem. The setting must be in 3 digits and at maximum 255 in value. Voice Surveillance In this mode, the user can dial up the unit to monitor the voice please refer to 5.
In existence of an authorized number, an unautho number dials up the unit. I have 3 questions, 1: Can I send multiple commands in one text? Please use the battery and charger provided by the manufacturer. Try to reset and to start the initialization again. In case of with a Geo-info numbers. Do you have one I could buy and then activate it here, I live in Toronto Canada. This will reveal the exact latitude and longitude coordinates of the cursor position on the map.
If you are not getting a gps signal, this is usually due to the device being inside a building. The default mode is and monitor auto track track. Copy the latitude and longitude coordinates as they appear into the first half of your Geo-fence command. Steps: 1 Open the rear cover, and pick out the battery. Specially when the device is in or even worse, is under a vehicle. There is two way to authorize, one is calling, number, then this number will automatically became one authorized number.
This shields the gps from the sat signal and causes it to drop out. I set up and tested the sim by sending sms to my phone from another. Battery and Charger Do charge the battery to capacity in 8 -12 hours for first use. Adelaide time zone is +9:30. The car is using by others and i need to monitor the locations. This manual shows how to operate the device smoothly and correctly. Others even set them to have only broadband data.